Sectors
Various
Productivity
Variabile
Camas Technology
Banco semiautomatico
Tests
Tight testing
Problem we solved
Leak and flow test
Tight testing bench with lean production approach, dedicated to run the critical air testing operation on different typologies of valve configurations.
The bench works with a double set of pieces in order to optimize the load/unload cycle. Using the Tightester unit is possible to:
The test procedure has been realized to detect any possible leakage both gaskets, the steam, and the sphere seats.
Thanks to the PLC the test results are stored on the PC present on the machine.
The cycle time of the machine shown into the pictures is 4 seconds but this solution could be applied on every production rate you need.
As well as this bench could be used to perform flow tests.